How to flash the SLAM XCAM using a Mac?

1.Download the firmware flashing tool：https://drive.google.com/file/d/1DBWAsnn7qJsYTbeWg2F-HxF82seh4XVC/view?usp=drive_link

Special thanks to Faye.

2.Unzip the flash package

download address: https://drive.google.com/file/d/1jLXBuaLz7oBfOfANnCwSlNGLjcIyFFmT/view?usp=drive_link

If this link is broken, reach out to customer support for the latest firmware package URL.

3.Extract and launch the flashing tool SLAMFirmwareUpdater

4.Connect the SLAM XCAM to your Mac. You will see that it is connected and currently in File Transfer mode. At this point, select the No Data Transfer mode from the SLAM XCAM’s drop-down menu.

5.Click Choose Directory :Select the folder where you extracted the firmware package.

6.choose Enable EDL Mode

7.choose the right files:

• Firmware Loader: xbl_s_devprg_ns.melf

• Rawprogram: rawprogram0_split.xml

• Patch: patch0.xml

  

  
  

8. Click the **Start** button in the top-right corner to begin flashing.

9.Wait for the flashing process to finish; it will take about 15 minutes.

After flashing is completed, long-press the POWER button several times to restart the device.

The flashing process is done once the device reboots.