RTMP Streaming Guide

This guide will use text and images to explain how to use the live streaming function of SLAM XCAM.

First, use the LiveQing tool to configure the relevant streaming server. After logging in, click "Authenticated Live Streaming", create a live stream, and then find the RTMP streaming URL in the Edit button.

Next, on SLAM XCAM, first open Slam Camera, select the "Live Streaming Page", and click the red Start button. You can choose either "Scan QR Code" or "Manual Input". If you select "Manual Input", enter or paste the correct RTMP streaming URL obtained from LiveQing earlier, click "Start Live Stream", and the live stream will begin after the countdown. Finally, click the Stop button to end the live stream.

Notes:

1. Different platforms may support different encodings. Please confirm the live stream's encoding format in the Settings section. Otherwise, the live stream may not be supported.

2. This guide uses LiveQing as an example only and does not constitute a recommendation. The focus is on introducing the live streaming method of the device (SLAM XCAM), and other streaming servers can also be used.

3. Link to LiveQing: https://www.liveqing.com/docs/download/LiveQing.html

4. Example of RTMP streaming URL format: rtmp://192.168.83.15:10085

/hls/BGOR3nqHR

5. Below are live streaming screenshots from two endpoints, for reference only.

after tape live red point

input the code here in the same blank

then start livesteam