If you shoot videos or photos with SLAMXCAM, quickly transferring the footage to your Mac for editing is an essential step. Good news: You don’t need a data cable at all, nor any complicated settings. All you need is one tool — LocalSend. Below is a step-by-step guide to the operation.n. Before you start, please make sure: SLAMXCAM is powered on and connected to Wi-Fi. Your Mac is connected to the same Wi-Fi network. LocalSend is pre-installed on the camera (installed by defa

Dear Users, To continuously enhance product experience and creative imaging capabilities, Slam Camera App has been officially upgraded to version 1.0.1.38. This update includes multiple optimizations and enhancements for image format compatibility, image tuning performance and special effects presentation, greatly improving the overall shooting and preview experience. The detailed update contents are as follows: ✨ New HEIF Format Support Added support for High Efficiency Imag

1. Download the firmware flashing tool： https://drive.google.com/file/d/1DBWAsnn7qJsYTbeWg2F-HxF82seh4XVC/view?usp=drive_link Special thanks to Faye. 2.Unzip the flash package download address: https://drive.google.com/file/d/1jLXBuaLz7oBfOfANnCwSlNGLjcIyFFmT/view?usp=drive_link If this link is broken, reach out to customer support for the latest firmware package URL. 3. E xtract and launch the flashing tool SLAMFirmwareUpdater 4.Connect the SLAM XCAM to your Mac. You will s

Press and hold both the Volume Up and Volume Down buttons at the same time, then press the Power button. Keep holding for about 10 seconds, and you will enter the 9008 flashing mode . Then connect the device to your Mac computer.